Horner-apg XLt OCS Bedienungsanleitung PDF herunterladen (Seite 28)

CH. 7 MAN0878-04-EN

August 12, 2009 Page 28 of 100 ECN # 979

7.3 Modem COM Module (XMC) Option

A Modem COM module can be installed to allow Cscape programming of an XLe/XLt over a dial-up

network. In addition, the application ladder program can take control of the modem for application-

specific modem communication.

The Modem COM module supports the standard AT command set and can connect to the dial-up network

at speeds up to 14.4 KBaud. Connection speed is auto-negotiated. The Modem COM module connects

to the dial-up network (phone line) via a cable with a standard RJ11 modular plug.

To enable Cscape programming via a dial-up network, the Modem COM module should first be

configured as the Default Programming Port, using the XLe/XLt System Menu (see

CHAPTER 11). Doing

this puts the Modem COM module in auto-answer mode, so Cscape can call the XLe/XLt via a remote

modem.

To program the ladder application to communicate via the Modem COM module, standard Cscape Serial

and Modem function blocks can be used.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Keine Kommentare

Horner-apg XLt OCS Bedienungsanleitung Seite 28